FROM POWDER TO PERFORMANCE
HANA Advanced Material Technology
An accessible end-to-end metal 3D printing solution for functional metal parts, next-day.
The Metal X System is an accessible way to fabricate complex metal parts in a wide variety of advanced metals.
Printing Process
Metal FFF
Z Layer Resolution
50 μm – 125 μm (Post-Sinter)
Printing Media
Bound Powder Filament
Internal Part Geometry
Closed Cell Infill (Triangular) or Solid Parts
Print Bed
Heated, Auto Leveling, Replaceable Print Sheets
Wash-1
External Dimensions:
609 x 685 x 1,067 mm
Weight:
136 kg (300 lbs)
Washing Time:
12-72 hrs typical
Solvent:
Opteon SF-79
Working Volume:
356 x 254 x 203 mm
Sinter-2
External Dimensions:
1,200 x 700 x 1,500 mm
Weight:
350 kg (772 lbs)
Run Time:
17-31 hours
Sintering Volume:
18,356 cu cm
Peak Internal Temp.:
1,300° C / 2,372° F
높은 강도 내식성 및 경도를 겸비하여, 다양한 제조 분야에 사용됩니다
공기 경화 도구 강철 – A2는 최대 50HRC까지 공기 경화가 가능하고 단단하며, D2는 55HRC까지 공기 경화가 가능하며 내마모성이 매우 뛰어납니다. 주사위, 스탬프, 절단 도구에 사용됩니다.
고온과 부식성이 뛰어난 니켈크롬합금입니다. 자동차 및 항공우주 분야에서 사용됩니다.
열 전도율과 전기 전도율을 함께 갖추고 있습니다. 열 싱크, 맞춤형 전도성 요소 및 기타 기하학적으로 복잡한 부품을 인쇄할 수 있습니다.
인성, 내마모성 및 내열성이 뛰어난 열작업 공구강입니다. 고온에서 강합니다.
Release Material
-
Ceramic — Becomes Powder During Sintering Process
Media (Spools)
Bound Powder Metal Filament
Metal X Printer
The Markforged Metal X is a new kind of metal printer. By printing metal powder bound in a plastic matrix, Markforged has eliminated many of the safety risks associated with traditional metal 3D printers. That means no loose powder, no lasers, and none of the traditional safety precautions. It’s safe to use in a shop environment with minimal facility upgrades.
In practice, the Metal X is essentially a very advanced FFF 3D printer. Featuring a precision machined gantry, a heated chamber and print bed, and advanced extrusion hardware, the Metal X is equipped to reliably print you durable parts. It is intentionally designed, with wear components and consumables — including print sheets, nozzles, and brushes — accessible and trivial to swap.
Sinter-2 and Sinter-1
The Markforged Sinter-2 and Sinter-1 are highly optimized tube furnaces used for sintering 3D printed metal parts. They provide leading edge sintering reliability and run times and are equipped with advanced safety features. The Sinter-2 is more advanced than the Sinter-1 — featuring a larger working volume, more precise temperature control, and a mechanical door interlock.
The Sinter-1 and Sinter-2 typically have run times between 26 and 31 hours. However, the Sinter-2 can process small parts in express mode, where it can sinter up to 250g of parts in just 17 hours.
Wash-1
The Wash-1 is a solvent-based debinding system. It primarily uses Opteon SF-79, a high-performance fluid designed to offer superior cleaning power, higher efficiency, and safety in an environmentally sustainable way — Opeton SF-80 or Tergo Metal Cleaning Fluid can be substituted if needed.
The Wash-1 operates with simple ventilation and features an extremely simple user experience. It’s been tested and verified as a shop-safe system.
Design your part, upload it into our browser-based software, select from a wide range of metals, and hit print. It’s that simple.
Simple and safe workflow
designed for any business.
